 |
 |
|
|
| |
| Mercury Building Products
recommend the use of an eaves carrier in both open and closed
eaves construction when a Vapour Permeable Membrane is used
as the roof underlay in a pitched roof application. |
- Suitable for New Build and Refurbishment
- Prevents ponding behind the facia
- Provides clear drainage point into gutter
- Prevents prolonged exposure of the underlay to UV
radiation, reducing long term maintenance
|
- Eliminates need for tilting fillet behind facia
- Extended flange ideal for refurbishment
- Easy to install
- Versatile – suitable for most roof pitches.
|
|
 |
Installation Guide: |
| VapR-free Eaves Carriers should be positioned to the
lower part of the rafters utilising the area provided
for the facia board with an overlap of 100 mm. Fixing
should occur on each rafter by simply nailing or stapling.
|
| The roof underlay is positioned over the eaves carrier
by a minimum of 200 mm but must not overspill into the
gutter. Double-sided adhesive tape should be used to seal
the eaves carrier and underlay if requiring a completely
sealed roof. |
| Batten out roof and slate or tile as normal. |
|
|
|
|
 |
|
|
|
| Product Data |
|
|
|
 |
